D-LINK DT-100 for PC/XT/AT NIC Type Token-Ring Transfer Rate 4/16Mbps Data Bus 8-bit ISA Topology Ring Wiring Type MAU via DB-9 port Boot ROM Available [Image] BOOT ROM ADDRESS Address SW1/1 SW1/2 SW1/3 SW1/4 SW1/5 SW1/6 C0000h Off On On On On On C2000h Off On On On On Off C4000h Off On On On Off On C6000h Off On On On Off Off C8000h Off On On Off On On CA000h Off On On Off On Off CC000h Off On On Off Off On CE000h Off On On Off Off Off D0000h Off On Off On On On D2000h Off On Off On On Off D4000h Off On Off On Off On D6000h Off On Off On Off Off D8000h Off On Off Off On On DA000h Off On Off Off On Off DC000h Off On Off Off Off On DE000h Off On Off Off Off Off INTERRUPT REQUEST IRQ SW1/7 SW1/8 2 On On » 3 On Off 7 Off Off PRIMARY/SECONDARY CARD SELECT Setting SW1/9 » Primary Off Secondary On Note:If two NICs are installed in the system, one must be set to primary, and the other to secondary. SHARED MEMORY SIZE Size SW1/10 SW1/11 8KB On On » 16KB Off On 32KB On Off 64KB Off Off Note:Shared memory is the page size used when copying the NIC's ROM to system memory. NETWORK SPEED Speed SW1/12 16Mbps Off 4Mbps On Note:All NICs on the network must be set to the same speed.